When it comes to helmets, Bell is a very reliable and popular brand. There was a bit of stir in the market with their Best Bell Qualified full-face helmet. It is because of its incredible features and offering great value for money to people. It scores more than the other best competitive products in the range, at least on a couple of grounds, if not more. The design, performance, and convenience of this helmet are all good and reliable.
We will check all these parts in detail so that you have a good and precise idea about it. It not only meets but exceeds the modern requirement of motorcyclists. They could trust this helmet either on a long route or for long hours. The reasonably lightweight and performance of this helmet would inspire you to carry on with the same product and also become a good referrer of the item.
If you have any confusion and want to know further and deep information about this product then do check out this detailed review below. It will answer all your questions so that you are in a comfortable position to make your decision. You can always come back to check for any updates on the item.
This is a full-face helmet. It means that the item will cover your complete head and it has a rear to cover entirely the base of the skull. There is also a very useful protective section right by the front of your chin. The visor or shield of this helmet is tinted.
This is good when it comes to riding the bike in bright light conditions or when you want to feel at ease with the traffic coming from the opposite side at night while having their headlights on.
This one is a three-shell design helmet. It means added flexibility and convenience for the motorcycle rider where the helmet offers a nice and comfortable grip.
EPS design is also ensured in the helmet. EPS or Expanded Polystyrene is a crushable foam. It is widely used in top-of-the-line helmets. EPS is quite lightweight and it is believed to be temperature efficient as well.
You will find it highly useful for reducing the amount of energy transferred to the skull or head during an impact. EPS is also believed to be a type that would go on to maintain all of its protective characteristics over a good long period.
Features that matter
The Bell Qualifier has several vents over its helmet shell. You will have a pair of chin vents that are operated by a switch.
Then there are four brow vents given right above the visor and a central switch could be used for opening those with ease.
Moving on, you will have the option of a couple of crown vents which could be operated individually through a slider which is given behind each of these vents. This ventilation system will help you to keep cool and will offer a sweat-free experience.
As the helmet has a lot of vents so the inside padding of the helmet is not the thickest. This means that the helmet could be slightly noisier.
When it comes to the visor then it has anti-fog treatment on the back only. The visor itself comes with photochromic reactive stuff as the standard. The technology that Bell uses with their Visor comes from Transitions.
It is the company known for making the best glass lenses. The comfort and sizing of the helmet are some of the finest in the range.
It has a comfortable, washable, and removable moisture-wicking lining. You will find it adjustable too. The replacement cheek pads could also be inserted as required.
Let us start this section with the certification, recognition, and endorsement of this Bell Qualifier helmet. You will be happy to learn that this one is DOT and ECE certified. Therefore, it is legal and endorsed in the USA, Europe, and Australia or wherever these standards apply. The helmet is SHARP tested for safety by the manufacturer where it got a reasonable score of 3/5. It is just for this helmet from the brand with such a low score.
Otherwise, a few other models from the brand have all scored 5/5. The low score was mainly because of its compromised performance in the left side impact test. On the good side, Multi-directional Impact Protection System (MIPs) turned out to be good. It is the safety feature allowing for the interior shock-absorbing lining to move the outer shell, partially independently.
It works well for countering any rotational forces impact. You must note that the rotational forces during an accident could twist the skull and may cause neck injuries as well. Therefore, it is great to see Bell Qualifier coming up with such amazing safety features which are tried and tested for top quality and performance.
The Bell Qualifier is a full-face helmet. It means that this helmet will cover your entire face and head. The item comes with a durable and comfortable chin strap that has a D-ring closure. You must note here that some part of your chin will still be exposed. This helmet offers polycarbonate/ ABS construction of its shell. This construction is durable and scratch-resistant as well.
The reliable quality of the material promises not to show any notable signs of wear and tear any time soon. If you want to clean the shell then all you need to have is a soft cloth and soapy water to be used. The interior padding of the helmet is removable. You can replace it or wash it as well for reusing the same. This is also true for the contoured cheek pads of the helmet.
These contoured sections in the helmet are ideally designed to fit different shapes while providing the best tight fit. The construction of the helmet also comes with a D-ring lock. This is a useful thing that will help you in keeping the helmet tightly secured to your head. It is also considered as a useful detail for the reason as it stays intact in case of a considerable impact.
Comparison with its competitors
If you are looking for added satisfaction, performance, and value for money then the Bell MX-9 Adventure Full-Face MIPS helmet is one great choice to consider. However, in comparison with our subject Bell Qualifier Full-Face helmet, you might see a couple of features here or there. This comparative product is an ideal option for both professional and beginners both.
It comes with some extra cost as well. The liner for both is removable and washable. The ventilation for this new helmet is better than the first one as the latter offers velocity-flow ventilation which is highly desirable for motorcyclists who are on a long ride. You can use this helmet to work with a dirt goggle as well. There is added material protection with UV protection apart from just anti-scratch.
There is a special cheek pad sweat buildup control feature as well. On top of that, you will also get this one with the flying edge visor. If these different features are of value to you then you may pay a little extra to get the Bell MX-9 Adventure Full-Face MIPS helmet instead of the subject Bell Qualifier. Other than these mentioned features, both these full-face helmets are almost the same.
Frequently Asked Questions (FAQs)
Does Bell Qualifier have an option for Bluetooth speakers?
Yes, there is space on either side of the helmet to install the small speakers for Bluetooth.
Does the manufacturer offer any warranty with this Bell Qualifier full-face helmet?
Yes, you will get this helmet with an excellent 5 years warranty from the manufacturer.
Will the experience of wearing this helmet be quite a hen riding in heavy traffic areas?
The helmet comes with a lot of vents all around the item. On top of that, there is the thinner lining of the helmet. This allows quite a bit of outside noise to easily penetrate inside the helmet. Therefore, in terms of noise, you will be hearing quite a bit of it when riding a bike in heavy traffic areas.
Is this helmet compliant with US safety standards?
The helmet is compliant with the US Federal Motor Vehicle Safety Standard 218.
The prime reason for anyone wearing a helmet on a motorcycle is safety. It helps in protecting the head of the rider during any significant impact when some accident occurs. It reduces, if not eliminate any chances of serious or fatal head injury. The Bell Qualifier in terms of safety, convenience, and value-added features provides great value for money for the people.
In comparison to the partial or half-face helmets, the full-face ones are highly desirable. Such helmets offer added safety, protection, and convenience as well. The helmet has excellent ventilation, padding, and a lightweight of 2.1 pounds only.
The safety features are excellent and the helmet is DOT and ECE certified along with its compliance with FMVSS 218.